For Sale: Metal Stand for Sieg X3 Mill

You are visitor number since 12/30/06
Copyright 2000-2006 by Frank J. Hoose, Jr. Home

  Mini-Lathe    Mini-Mill    Bandsaw   Grinder   Links   Safety     Premium Content

Mini-mill:  Accessories    Capabilities   Features    Introduction   Operation    Maintenance    Modifications   Reviews   Setup   Versions

Sieg X3 Stand for Sale (12/30/06)

    Sieg X3         Grizzly G0463               HF 93885

(Update: 01/04/07)
I have received a $50 offer so the stand is no longer up for sale. Thanks to everyone who visited and made an offer!
(End of update)

A few days ago, I sold my Sieg X3 mill to make more room for the Super X3 mill. The X3 mill was mounted on a metal cabinet stand but the buyer did not need the stand so I am offering it for sale here. This stand is made by Sieg for either the X3 or Super X3 mill. This is the same mill as the Grizzly G0463 or G0619 and the Harbor Freight 93885, so the stand will fit any of those mills. It could easily be adapted to other mills or tools as long as they weigh no more than about 350 lbs.

Stand with roll-around base and table

Also included are a worktable with plastic laminate surface and a roll-around base with casters. These did not come with the cabinet originally - I added them later for convenience. The worktable is very useful for holding tools, etc. when using the mill. The base makes it easy to move the 350+ lb. mill (475 lbs. including the stand!) when cleaning up or reorganizing the shop, but can easily be removed if you don't need it or have room for it.

Tool storage cabinet

The  cabinet door is slightly out of alignment and catches on the upper left corner when opening or closing, but otherwise works fine. This was the way I received it and was apparently shipping damage on the trip from China. It could probably be fixed with a little work, but it is only a minor annoyance, so I never bothered.

Dimensions:

• Cabinet: 17" W x 29" D x 31" H
• Table: 33" W x 21" D
• Roll-around base: 30" W x 33" D

Weight: approx. 125 lbs. including wood base and laminated table

Conditions of sale:

• I will not ship this item due to its bulk and weight. You must pick it up at my shop in Fairfax, VA.
• First $50 offer received or Best Offer over $20 received by noon on Friday, 1/19/07
• Send your offers to "fhoose-at-yahoo.com" (email address modified to avoid spam, replace "-at-" by "@")
• Contact me at that email address if you have questions
• Payment by cash at time of pickup

  Top of table showing mounting points

  Side view

  Mini-Lathe    Mini-Mill    Bandsaw   Grinder   Links   Safety     Premium Content

Mini-mill:  Accessories    Capabilities   Features    Introduction   Operation    Maintenance    Modifications   Reviews   Setup   Versions